How to design a Safety And Quiet Shower Room to prevent water splashing and leakage and ensure the dryness and safety of the bathroom?
Publish Time: 2024-08-01
The design of the Safety And Quiet Shower Room to prevent water splashing and leakage and ensure the dryness and safety of the bathroom mainly depends on the following aspects:1. Waterproof threshold designHeight and slope: A certain height of waterproof threshold is usually set at the door of the shower room, generally not less than 5cm, and combined with a certain inner high and outer low slope design to prevent water overflow.Sealing: The threshold and the ground must be well sealed. High-quality waterproof glue or waterproof strips can be used for sealing to prevent water from seeping out of the gap.2. Ground waterproofingWaterproof materials: The shower room floor should use high-quality waterproof materials, such as waterproof coatings, waterproof rolls, etc., to ensure that the floor has good waterproof performance.Drainage slope: The ground should be designed with a reasonable drainage slope, which generally gradually decreases towards the floor drain to facilitate rapid drainage and reduce water accumulation.Floor drain design: The floor drain should be located at the lowest point of the shower room, with an appropriate diameter, smooth drainage, and avoid blockage. At the same time, the floor drain needs to be sealed to prevent water from seeping out from the edge of the floor drain.3. Shower room partition and glass materialPartition design: Shower rooms usually use glass partitions to divide independent shower spaces. The partitions need to be installed firmly and kept sealed with the wall and the floor to prevent water from splashing out.Glass material: Glass should be made of tempered glass or laminated glass with moderate thickness and high strength to ensure safe use. At the same time, the glass surface should be smooth and flat, not easy to hang water, and reduce water stains.4. Drainage system optimizationDrainage pipes: The drainage pipes of the shower room should be reasonably designed and have a large enough diameter to ensure unobstructed drainage. At the same time, the pipe joints need to be well sealed to prevent water leakage.Secondary drainage: A secondary drainage system can be set up under the floor of the shower room to deal with special situations such as failure of the ground waterproof layer or blockage of the floor drain, to ensure that water can be discharged in time.5. Daily maintenance and careRegular inspection: Regularly check the waterproof threshold, ground waterproof layer, drainage system, etc. of the shower room to ensure that there is no damage or leakage.Cleaning and maintenance: Regularly clean the shower room glass, floor and other areas to keep them clean and tidy, reduce water stains and bacterial growth.In summary, Safety And Quiet Shower Room uses comprehensive design in multiple aspects such as waterproof threshold design, ground waterproof treatment, shower room partition and glass material selection, drainage system optimization, and daily maintenance and care to ensure that water does not splash and leak, thereby keeping the bathroom dry and safe. Safety And Quiet Shower Room of different brands may differ in the design and implementation of these aspects. Consumers should consider factors such as product quality, performance, price and after-sales service when choosing.
